矩陣式彈簧減震器 您還在為變壓器的噪音而煩惱？

上海淞江減震器集團有限公司官方網站為您介紹：矩陣式彈簧減震器 您還在為變壓器的噪音而煩惱？信息，淞江集團為干式變壓器設計一款矩陣式彈簧減震器，主要用于新型機房變壓器減震降噪，我們?yōu)楸姸嗑志S項目配套變壓器減震器。

BYQ型彈簧減震器由多組大外徑、大變形量彈簧、上下鋼板及橡膠防滑墊組成；

主要適用于：現(xiàn)代化機房變壓器，例如云數據中心變壓器；

產品具有變形量大、性能穩(wěn)定、隔震效果好、使用壽命長達10年以上；

隔震隔音效果好，可以將變壓器隔震率90%以上，隔音量達到15~20dB；

減震器橫向剛度與豎向剛度比值大于1.5，穩(wěn)定性好；

安裝施工簡單方便，改造費用低；

1、一個變壓器使用2個；

2、表格中對應變壓器主要是針對銅芯變壓器，如果是鋁芯變壓器需要計算，鋁芯的輕很多；

3、安裝前后效果提升90%；

4、貨期：7天；

5、質保10年；

6、江浙滬支持上門安裝服務（有江蘇供電系統(tǒng)安裝資質）；

7、檢測：夜間檢測，包含兩次檢測（安裝前后檢測，上門安裝用戶包含此項）；

8、單個產品大概在50kg左右；

9、干式變壓器安裝圖紙下載；

BYQ spring shock absorber is composed of several groups of large outer diameter, large deformation spring, upper and lower steel plates and rubber anti-skid pads;

Mainly applicable to: modern machine room transformer, such as cloud data center transformer;

The product has large deformation, stable performance, good isolation effect and service life of more than 10 years;

The isolation and sound insulation effect is good, the isolation rate of transformer can be more than 90%, and the isolation volume can reach 15 ~ 20dB;

The ratio of lateral stiffness to vertical stiffness is more than 1.5, and the stability is good;

The installation and construction are simple and convenient, and the transformation cost is low;

Explain:

1. Two for one transformer;

2. The corresponding transformer in the table is mainly for copper core transformer. If the aluminum core transformer needs to be calculated, the aluminum core is much lighter;

3. 90% improvement before and after installation;

4. Delivery period: 7 days;

5. 10 years warranty;

6. Jiangsu, Zhejiang and Shanghai support door-to-door installation service (with Jiangsu power supply system installation qualification);

7. Test: Night test, including two tests (before and after installation);

8. A single product is about 50kg;

相關產品鏈接：變壓器減震器

相關案例鏈接：【大連華潤置地大連灣項目】變壓器彈簧減震器合同